|
Photon Booster LED module
The Photon Booster is the LED module used in our Photon Blaster and P3 Lights visibility lighting systems.
The module is available in white for front mount applications, yellow for front or side mount applications, and red for rear mount applications.
The module consists of 12 high-brightness LEDs mounted in a waterproof housing. A 4mm stainless steel mounting bolt protrudes 7.5mm (0.3") from
the rear of the housing, and is designed to work with a variety brackets available from us, or your own mounting bracket.
An installation guide, a 4mm stainless steel locking nut, and two Posi-twist® connectors are included.
Skene Design has a 30 day money-back return policy and a 2 year warranty in the event of any defect in the product.
Specifications:
Current draw: 0.14A
Operating voltage: 9 - 16 VDC
LED intensity: total of 252,000 mcd
Intensity regulation: the LED module incorporates a current regulator to maintain maximum LED brightness even under low voltage conditions.
Angle of half intensity: 15 deg;
Wavelength: 592 nm (yellow), 612 nm (red)
Dimensions: 3" x 0.625" x 0.35"
Weight: 3/8 oz.
|
